ASSEMBLY INSTRUCTIONS
BLOWER ASSEMBLY
WARNING: To avoid serious personal injury, be sure the unit is off and unplugged before assembling any components.
1.With the unit off and unplugged, install the blower tube onto the motor housing.
Turn the tube clockwise until it locks (Figs. 1, 2 and 3).
MOTOR HOUSING |
BLOWER TUBE |
Fig. 1
| ASSEMBLY PARTS |
| BLOWER |
| BLOWER |
| TUBE |
| BLOWER |
| NOZZLE |
REAR | TUBE |
HAND |
|
GRIP | MOTOR |
| HOUSING |
Fig. 2
| ASSEMBLY PARTS |
| BLOWER |
| BLOWER |
| TUBE |
| BLOWER |
REAR | CONCENTRATOR |
TUBE | |
HAND |
|
GRIP | MOTOR |
| HOUSING |
Fig. 3
2.Insert the blower nozzle or concentrator tube onto the blower tube and turn it clockwise to lock (Figs. 2, 3 and 4).
NOTE: The blower tube and nozzle or concentrator tube must be used at all times when in blower mode to prevent the motor from overheating.
Fig. 4
VACUUM ASSEMBLY
WARNING: To avoid serious personal injury, be sure the unit is off and unplugged before assembling any components.
WARNING: To avoid serious personal injury, the vacuum tube assembly must be used whenever the vacuum door is open to avoid contact with rotating blades.
1.With the unit off and unplugged, release the vacuum door by carefully inserting a flat head screwdriver into the latch opening (Fig. 5). Twist the tip of the screwdriver gently and pull open the door with your other hand (Figs. 5 and 6).
Fig. 5
Fig. 6
7
