ASSEMBLY INSTRUCTIONS
Fig. 11
8.Close the zipper on the bag (Fig. 11).
9.Align the vacuum bag/elbow tube assembly with the grooves on the motor housing (Figs. 12 and 13).
10.Install the vacuum bag/elbow tube assembly onto the motor housing. Turn the assembly clockwise until it locks (Fig. 12).
WARNING: Vacuum bag assembly must be used at all times during vacuum mode to prevent personal injury from objects being discharged from blower outlet and to prevent overheating of motor.
ASSEMBLY - AS A VACUUM
MOTOR
HOUSING
VACUUM
ELBOW
TUBE
UPPER
VACUUM
TUBE
LOWER
VACUUM
TUBE
VACUUM
BAG
NOTE: Make sure the angled end of the vacuum tube is facing the bag.
Fig. 12
| ASSEMBLY PARTS | |
| FOR VACUUM MODE | |
MOTOR | ||
HOUSING | ||
| VACUUM | |
| ELBOW | |
| TUBE | |
VACUUM |
| |
DOOR |
| |
UPPER |
| |
VACUUM | VACUUM | |
TUBE | ||
BAG | ||
| ||
LOWER |
| |
VACUUM |
| |
TUBE |
| |
Fig. 13
9
