RULES FOR SAFE OPERATION
Safe operation of this accessory requires that you read and understand this operator's manual, the operator’s manual for the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
■KNOW YOUR ACCESSORY. Read the operator's manual carefully. Learn the product's applications and limitations as well as the specific potential hazards related to this product.
■KEEP THE WORK AREA CLEAN. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the saw while operating.
■ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS. Everyday eyeglasses have only
■DO NOT USE THIS PRODUCT WITH OTHER EQUIP- MENT OR FOR OTHER PURPOSES.
■ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY BEFORE ASSEMBLING THIS KIT. Make sure the switch is off when reconnecting the saw to a power supply.
■BEFORE MAKING A CUT, BE SURE ALL ADJUST- MENTS ARE SECURE.
■DO NOT USE AWKWARD HAND POSITIONS.
■KEEP FINGERS away from the cutter; use fixtures when necessary.
■ALWAYS USE THE DUST COVER for overhead guard- ing.
■DO NOT REMOVE JAMMED CUT OFF PIECES UNTIL the switch is off, the cutter has stopped, and the tool has been disconnected from the power source.
■HOLD WORKPIECE FIRMLY AGAINST THE TABLE.
■UNUSED SAW MAY CAUSE PERSONAL INJURY. Dis- connect the motor cord from the receptacle on your saw and plug the router power cord into the receptacle. Always use the saw's master switch to turn the routerON and OFF.
■NEVER USE A ROUTER BIT larger in diameter than the opening in the router mounting plate.
■DO NOT MAKE ADJUSTMENTS until the switch is off, the cutter has come to a complete stop, and the tool has been disconnected from the power source.
■FEED WORKPIECE AGAINST ROTATION OF THE CUTTER.
■SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct other users. If you loan someone this product, also loan these instructions.
Page 3
