Manuals / Ryobi / Lawn and Garden / Trimmer

Ryobi BC30 RY30564, CS30 RY30524 Warranty, This Product WAS Manufactured with a Catalyst Muffler

Models: BC30 RY30564 SS30 RY30544 CS30 RY30524

1 26

Download 26 pages 22.85 Kb

Page 23

Image 23

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.


	PROBLEM	POSSIBLE CAUSE		SOLUTION
Spool retainer hard to turn		1.	Screw threads are dirty or	1.	Clean threads and lubricate with grease - if no
			damaged.		improvement, replace the spool retainer.

G r a s s w r a p s a r o u n d		1.	Cutting tall grass at ground	1.	Cut tall grass from the top down to prevent
driveshaft housing and			level.		wrapping.
string head		2.	Operating trimmer at part	2. Operate trimmer at full throttle.

throttle.

WARRANTY

THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER

Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s original emission level, please refer to the maintenance section below.

	EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST
Emissions Parts	Inspect Before	Clean Every	Replace	Clean Every	Replace Every
	Each Use	5 Hours	Every 25 Hours	25 Hours	50 Hours
			or Yearly	or Yearly
CATALYTIC MUFFLER ASSEMBLY					X
AIR FILTER ASSY
includes:
Screen		X
SPARK SCREEN				X
CARBURETOR ASSY
includes:
Heat Dam
Gaskets
FUEL TANK ASSY
includes:
Fuel Lines	X
Fuel Cap	X
Fuel Filter
IGNITION ASSY
includes:
Spark Plug			X

ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR TWO YEARS OR FOR THE PERIOD OF TIME PRIOR TO THE PARTS FIRST SCHEDULED REPLACEMENT WHICHEVER COMES FIRST.

23

Image 23

Ryobi BC30 RY30564, CS30 RY30524, SS30 RY30544 manual Warranty, This Product WAS Manufactured with a Catalyst Muffler

Contents

Save this Manual for Future Reference OPERATOR’S Manual Introduction Table of Contents Read ALL Instructions General Safety Rules Specific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbol Name Explanation Symbols Symbol Signal Meaning Service String Head Coupler Throttle Trigger Knob FeaturesCoupler Assembly See Figure Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage Hanger Flat Washer Attaching the Front Handle CS30 and SS30Attaching the J Handle BC30 Front Handle Bolt Wing NUT Clamp Attaching the Brushcutter Guard BC30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 To Attach the Straight Shaft Grass Deflector SS30 Converting from String Trimmer to Brushcutter BC30 Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Removing the TRI-ARCBLADE and Brushcutter Guard Gear Head Flanged Washer Slot Installing the TRI-ARCBLADE and Brushcutter GuardOperation Removing the Straight Shaft Grass Deflector and String Head Operating the Trimmer Fueling and Refueling the Trimmer Grass Deflector Line Trimming CUT-OFF Blade To Advance the Cutting LineTo Advance the Cutting Line Manually Cutting Tips Cutting Technique Blade Operating the BrushcutterBlade Thrust TRI-ARCBLADE See Figures 21 Starting and StoppingTo Stop the Engine If Assistance is Required Starting this Product See Figures 23 MaintenanceGeneral Maintenance Spool Replacement See Figures 25 String ReplacementCleaning the Exhaust Port and Muffler Spark Arrestor Storing the Product Cleaning the AIR Filter ScreenSpark Plug Replacement Fuel CAP Fast TroubleshootingSpeed. See Figure This Product WAS Manufactured with a Catalyst Muffler Warranty Limited Warranty Statement MANUFACTURER’S Warranty Coverage California Proposition Parts and Service