Manuals / Ryobi / Lawn and Garden / Trimmer

Ryobi CS30 RY30524 manual Starting And Stopping, To Stop The Engine, Operation, See Figures 21

Models: BC30 RY30564 SS30 RY30544 CS30 RY30524

1 26

Download 26 pages 22.85 Kb

Page 18

STARTING AND STOPPING

OPERATION

STARTING AND STOPPING

See Figures 21 - 22.

Trimmer should be on a flat, bare surface for starting. The starting method differs depending on whether the engine is cold or warm.

To start a cold engine:

Slowly press the primer bulb seven (7) times.

Rotate the choke dial clockwise to the FULL CHOKE position.

Squeeze throttle trigger fully and continue to hold through remaining steps.

Pull the starter grip sharply until engine attempts to run (no more than 4 pulls).

Rotate the choke dial counterclockwise to the HALF CHOKE position.

Pull the starter grip sharply until the engine runs.

Allow the engine to run for 10 seconds.

Rotate the choke dial counterclockwise to the RUN position.

To start a warm engine:

Slowly press the primer bulb seven (7) times.

Pull the starter grip sharply until the engine runs.

TO STOP THE ENGINE:

See Figure 21.

Release the throttle trigger and press and hold STOP on the engine switch.

IF ASSISTANCE IS REQUIRED STARTING THIS PRODUCT:

Do not return this product to the retail store where it was purchased. Please call our Customer Service Department for any issues you may have.

For Help Call: 1-800-860-4050

PRIMER

STARTER BULB GRIP

CHOKE DIAL

STARTER

SWITCH

THROTTLE

TRIGGER

Fig. 21

PRIMER BULB

FULL

CHOKE

HALF

CHOKE

RUN

Fig. 22

18

Image 18

Ryobi CS30 RY30524 Starting And Stopping, To Stop The Engine, If Assistance Is Required Starting This Product, Operation

Contents

SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL30cc String Trimmers and Brushcutter CS30 RY30524 SS30 RY30544 BC30 RY30564MAKE THE MOST OF YOUR PURCHASE TABLE OF CONTENTSINTRODUCTION 4050GENERAL SAFETY RULES READ ALL INSTRUCTIONSSPECIFIC SAFETY RULES SPECIFIC SAFETY RULES FOR TRIMMER USENAME SYMBOLSSYMBOL EXPLANATIONDANGER SERVICESAVE THESE INSTRUCTIONS SYMBOLSPRODUCT SPECIFICATIONS FEATURESCS30 Weight - without fuelBC30 FEATURESSS30 COUPLER THROTTLE TRIGGER DRIVE SHAFT HOUSINGKNOBGRASS DEFLECTOR ASSEMBLYKNOW YOUR STRING TRIMMER TOP-MOUNTEDMOTORATTACHING THE STORAGE HANGER INSTALLING THE POWER HEAD TO THE ATTACHMENTREMOVING THE ATTACHMENT FROM THE POWER HEAD ASSEMBLYASSEMBLY ATTACHING THE FRONT HANDLE - CS30 AND SS30ATTACHING THE “J” HANDLE - BC30 See FigureATTACHING THE BRUSHCUTTER GUARD - BC30 ATTACHING THE GRASS DEFLECTORTO ATTACH THE CURVED SHAFT GRASS DEFLECTOR - CS30 ASSEMBLYATTACHING THE SHOULDER HARNESS - BC30 REMOVING THE TRI-ARC BLADE AND BRUSHCUTTER GUARDASSEMBLY See Figures 10 - OPERATIONASSEMBLY See Figures 10 -OPERATION FUELING AND REFUELING THE TRIMMEROPERATING THE TRIMMER FUEL MIXTURECUTTING TIPS TO ADVANCE THE CUTTING LINETO ADVANCE THE CUTTING LINE MANUALLY GRASS DEFLECTOR LINE TRIMMING CUT-OFFBLADETRI-ARC BLADE OPERATING THE BRUSHCUTTERBLADE THRUST CUTTING TECHNIQUE - BLADEIF ASSISTANCE IS REQUIRED STARTING THIS PRODUCT STARTING AND STOPPINGTO STOP THE ENGINE STARTER SWITCH THROTTLE TRIGGERSPOOL REPLACEMENT MAINTENANCEGENERAL MAINTENANCE EZ WIND TAP ADVANCE SYSTEM NEW PREWOUND SPOOLSPARK ARRESTOR STRING REPLACEMENTCLEANING THE EXHAUST PORT AND MUFFLER MAINTENANCEFUEL CAP CLEANING THE AIR FILTER SCREENSPARK PLUG REPLACEMENT STORING THE PRODUCTSOLUTION TROUBLESHOOTINGPROBLEM POSSIBLE CAUSEPROBLEM WARRANTYTROUBLESHOOTING SOLUTIONLIMITED WARRANTY STATEMENT WARRANTYMANUFACTURER’S WARRANTY COVERAGE WARRANTYYOUR WARRANTY RIGHTS AND OBLIGATIONS OWNER’S WARRANTY RESPONSIBILITIESCALIFORNIA PROPOSITION TECHTRONIC INDUSTRIES NORTH AMERICA, INCCS30 — RY30524 SS30 — RY30544 BC30 — RY30564 •PARTS AND SERVICE