FEATURES
KNOW YOUR LASER CIRCULAR SAW
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust chute is located on the side of the upper blade guard.
EDGE GUIDE
The edge guide is used when making long or wide rip cuts with the saw.
ERGONOMIC DESIGN
The design of your circular saw provides for maintaining proper two hand control when cutting. It has been designed to be comfortable and easy to grasp.
LASER GUIDES
The laser guides will generate a red laser beam on the work surface in front of and behind the saw when turned on.
SWITCH
The circular saw is equipped with a
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn- ing the blade screw.
NOTE: Do not run circular saw with spindle lock engaged.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Circular Saw with Lasers
Edge Guide Dust Nozzle Kit Wrench Case Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to heed this warning could result in serious per- sonal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
10
