OPERATION
POSITIVE 0° BEVEL STOP
See Figure 23.
The saw has a positive 0° bevel stop that has been factory adjusted to assure 0° angle of the saw blade when making 90° cuts.
TO CHECK POSITIVE 0° BEVEL STOP
nUnplug the circular saw.
nPlace the saw in an upside down position on a work- bench.
nCheck the squareness of the saw blade to the base of the saw using a combination square.
TO ADJUST POSITIVE 0° BEVEL STOP
nUnplug the circular saw.
nLoosen bevel adjustment knob.
nTurn set screw with hex key and adjust base until it is square with the saw blade.
nTighten bevel adjustment knob securely.
WARNING:
Attempting a bevel cut without having the bevel ad- justment knob securely tightened can result in serious injury.
� �� �
��
�
�
BEVEL ADJUSTMENT
KNOB
COMBINATION
SQUARE
SET SCREW
Fig. 23
20
