KNOW YOUR DRILL-DRIVER
See Figure 1.
Before attempting to operate your drill-driver, familiarize yourself with all operating features and safety require- ments.
WARNING:
Carefully read through this entire operator's manual before using your new drill-driver. Pay close attention to the Safety Rules, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service.
ELECTRICAL CONNECTION
Your drill-driver has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your drill-driver does not operate when plugged into an outlet, double-check the power supply.
WARNING:
Do not allow familiarity with your drill-driver to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
LEVEL
TORQUE
ADJUSTMENT
RING
24
0 2
L
L
F
F
A
A
CHUCK
SWITCH
TRIGGER
KEYLESS CHUCK
Your drill-driver has a keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws.
SWITCH
To turn your drill-driver ON, depress the switch trigger. Release switch trigger to turn your drill-driver OFF.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse selector located above the switch trigger.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
BIT STORAGE
When not in use, bits provided with your drill-driver can be placed in the storage area located in the motor housing.
LEVEL
Two levels are recessed in the motor housing of your drill-driver. They can be used to keep drill bits level during both horizontal and vertical drilling operations.
LEVEL
®
DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE)
LOCK-ON
BUTTON
