Ryobi ELL0006 manual Know Your Crosshair Laser Level, Adjustment Knobs, Airgrip Vacuum Technology

FEATURES

	TRIPOD ADAPTOR
	and adaptor	ROUGH SURFACE
	storage
		ADAPTOR
PUSH PIN		PUSH PIN
and pin
		HOLES
storage

HOOK-AND-LOOP

STRAP

STRAP

LOOPS

MULTI-FUNCTION

BASE

Fig. 2

KNOW YOUR CROSSHAIR LASER LEVEL

See Figures 1 - 2.

The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all oper- ating features and safety rules.

ADJUSTMENT KNOBS

The rotational and line height adjustment knobs are used to fine tune your laser line settings.

AIRGRIP VACUUM TECHNOLOGY

This product uses a vacuum base that can adhere to smooth surfaces. Using the vacuum seal prevents wall damage caused by nails or adhesive tape. The vacuum base also features a 5/8 in. - 20 tripod mount.

HOOK-AND-LOOP STRAP

The hook-and-loop strap can be used to attach the unit to a variety of irregularly shaped surfaces.

LASER HOUSING

The laser housing on your level rotates to allow for 360˚ of laser line coverage.

LASER POWER/MODE SELECTOR

The laser power/mode selector is used to select one of three available operating modes — horizontal mode, vertical mode, or crosshair mode.

MULTI-FUNCTION BASE

The multi-function base allows the laser level to be used on irregularly shaped walls or objects. It features built-in loops for a hook-and-loop strap, angled holes for push pins, and storage compartments for the push pins and the 1/4 in. tripod adaptor. The base also protects the unit when using on a dusty or dirty surface and during storage.

ROUGH SURFACE ADAPTOR

The rough surface adaptor increases the number of surfaces on which the AIRgrip vacuum can be used.

VACUUM BASE ON/OFF BUTTON

The vacuum base of your laser level conveniently turns on and off at the touch of a button.