OPERATION
SWITCH
See Figure 7.
To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.
The drill has a
SWITCH LOCK
See Figure 7.
The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use. To lock the switch trigger, place the direction of rotation selector in the center position.
REVERSIBLE
FORWARD / REVERSE SELECTOR WITH CENTER LOCK POSITION
SWITCH
TRIGGER
See Figure 8.
This tool is reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
CAUTION:
To prevent gear damage, always allow chuck to come to a complete stop before changing the direction of rotation.
SELECTOR
Fig. 7
REVERSE
To stop, release switch trigger and allow the chuck to come to a complete stop.
KEYLESS CHUCK
See Figure 9.
A keyless chuck has been provided with the drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit.
WARNING:
Do not hold the chuck body with one hand and use the power of the drill to tighten chuck jaws on drill bit. Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury.
FORWARD
Fig. 8
RELEASE | CHUCK |
(UNLOCK) | |
DRILL BIT | BODY |
|
CHUCK
JAWS
GRIP (TIGHTEN)
CHUCK
COLLAR
Fig. 9
14
