TROUBLESHOOTING

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE
SOLUTION

String will not advance when using the auto-feed head:

String is welded to itself.

Lubricate with silicone spray.

Not enough string on spool.

Installmorestring.RefertoStringReplacement

 

earlier in this manual.

String is worn too short.

Pull string while pressing button.

String is tangled on spool.

Remove string from spool and rewind. Refer

 

to String Replacement earlier in this manual.

Grass wraps around boom

Cutting tall grass at ground

housing and string head

level.

Cut tall grass from the top down to prevent wrapping.

Motor fails to start when switch

Battery is not secure.

To secure the battery pack, make sure the

trigger is depressed.

 

latches on each side of the battery pack snap

 

 

into place.

 

Battery is not charged.

Charge the battery pack according to the

 

 

instructions included with your model.

 

 

 

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

10 — English

Page 12
Image 12
Ryobi P2005 Call Us First, Troubleshooting, call the Ryobi Help Line, your complete satisfaction, Problem, Possible Cause