ASSEMBLY
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Blower
Blower Tube
Battery Pack
Charger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this blower. Any such altera- tion or modification is misuse and could result in a hazard- ous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
ASSEMBLING THE BLOWER TUBE
See Figure 2.
nWith the logo area facing up, slide the blower tube over the outlet on the blower housing.
nPress down on the tab on the blower housing outlet.
nPush tab on outlet on the blower housing down until it locks into place through the opening in the blower tube.
OPERATION
WARNING: | APPLICATIONS | |
You may use this product for the purposes listed below: | ||
|
Do not allow familiarity with products to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
Clearing hard surfaces such as driveways and walkways
Keeping decks and driveways free from leaves and pine needles
This product will accept Ryobi One+ 18 V
For complete charging instructions, refer to the Operator’s Manuals for your Ryobi One+ battery pack and charger models.
STARTING/STOPPING THE BLOWER
WARNING:
Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
See Figure 3.
To start the blower, place the power switch in the ON ( l ) position.
To stop the blower, place the power switch in the OFF ( O ) position.
TO INSTALL / remove BATTERY PACK
WARNING:
Blower is intended for household use only.
See Figure 4.
WARNING:
Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.
7 — English