FEATURES
PRODUCT SPECIFICATIONS
Motor | 18 Volt DC |
Bar Length | 10 in. |
Replacement Bar |
|
Part Number | 671256002 or 671834007 |
Replacement Chain |
|
Part Number | 6958301 or 690583002 |
NOTE: This saw was designed for occasional light duty use and has some limitations as to what it can cut.
KNOW YOUR cHAINsAW
See Figure 5.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any acces- sories from the box. Make sure that all items listed in the packing list are included.
WARNING:
This new product has been shipped in a partially assembled condition as described below. Care- fully check the packing list below to ensure all items are included in the package. The pack- ing list describes all loose items that are not assembled to the product as shipped. Do not operate the product if any packing list items are already assembled to your product when you unpack it. Call the customer service number below for assistance. Operation of a product that may have been improperly preassembled could result in serious personal injury.
Inspect the product carefully to make sure no breakage or damage occurred during ship- ping.
Do not discard the packing material until you have carefully inspected and satisfactorily oper- ated the product.
If any parts are damaged or missing, please call
PACKING LIST
Chain Saw with Scabbard
Wrench
Bar and Chain Lubricant
Operator’s Manual
Battery Pack
Charger
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in seri- ous personal injury.
WARNING:
Do not attempt to modify this product or cre- ate accessories not recommended for use with this product. Any such alteration or modifica- tion is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the bat- tery pack from the product when assembling parts.
9 - English
