OPERATION

Proper Cutting Stance

See Figure 11.

Weight should be balanced with both feet on solid ground.

Keep left arm with elbow locked in a “straight arm” position to withstand any kickback force.

Your body should always be to the left of the chain line.

Thumb should be on underside of handlebar.

Basic Cutting Procedure

Practice cutting a few small logs using the following technique to get the “feel” of using the saw before you begin a major sawing operation.

Take the proper stance in front of the wood with the saw off.

Squeeze the switch trigger and let the chain accelerate to full speed before entering the cut.

Begin cutting with the saw against the log.

Keep the unit running the entire time you are cutting, maintain a steady speed.

Allow the chain to cut for you; exert only light downward pressure. If you force the cut, dam- age to the bar, chain, or unit can result.

Release the switch trigger as soon as the cut is completed, allowing the chain to stop. If you run the saw without a cutting load, unnecessary wear can occur to the chain, bar, and unit.

Do not put pressure on the saw at the end of cut.

Work Area Precautions

Cut only wood or materials made from wood, no sheet metal, no plastics, no masonry, no non-wood building materials.

Never allow children to operate the saw. Allow no person to use this chain saw who has not read this Operator’s Manual or received ade- quate instructions for the safe and proper use of this chain saw.

When felling a tree, keep everyone - helpers, bystanders, children, and animals - a safe distance from the cutting area. During felling operations, the safe distance should be a least twice the height of the largest trees in the fell- ing area. During bucking operations, keep a minimum distance of 15 feet between work-

CHAIN LINE

STRAIGHT ARM POSITION

Fig. 11

ers.Trees should not be felled in a manner that would endanger any person, strike any utility line or cause any property damage. If the tree does make contact with any utility line, the utility company should be notified immediately.

Always cut with both feet on solid ground to prevent being pulled off balance.

Do not cut above chest height, as a saw held high- er is difficult to control against kickback forces.

Do not fell trees near electrical wires or build- ings. Leave this operation for professionals.

Cut only when visibility and light are adequate for you to see clearly.

Tree Felling

See Figures 12 - 15.

Unusual Hazardous Tree Felling Conditions

Do not fell trees during periods of high wind or heavy precipitation. Wait to do your cutting until the hazard has ended.

WARNING:

Do not cut down trees having an extreme lean or trees that have rotten limbs, loose bark, or hol- low trunks. Have these trees pushed or dragged down with heavy equipment, then cut them up.

DANGER:

Electrocution hazard. Do not cut trees or branches near power lines or electrical wires. Contact with power lines or live electrical wires will result in serious personal injury or possible death.

14 - English

Page 14
Image 14
Ryobi P542 Proper Cutting Stance, Basic Cutting Procedure, Work Area Precautions, Tree Felling, See Figures 12

P542 specifications

The Ryobi P542 is an impressive addition to the world of cordless tools, designed to fulfill a wide variety of cutting tasks with utmost efficiency and precision. Powered by a robust and efficient 18V battery system, this circular saw caters to both professionals and DIY enthusiasts alike, offering a perfect blend of power, portability, and convenience.

One of the main features of the Ryobi P542 is its lightweight, compact design which makes it easy to maneuver and handle for extended periods. At just 5.5 pounds, it reduces fatigue during prolonged use, making it ideal for users who need to tackle multiple projects in one day. Its ergonomic grip ensures a comfortable hold, allowing for accurate cuts without compromising user safety.

The P542 is equipped with a powerful and efficient brushless motor, which not only enhances performance but also extends the tool's longevity. The brushless technology translates to less friction and heat generation, resulting in greater efficiency and battery life. This ensures that users can depend on the tool for longer operations without the need for constant battery replacements.

Another notable feature of the Ryobi P542 is its impressive cutting capacity. It boasts a 6-1/2 inch carbide-tipped blade that can slice through materials with ease. The saw is capable of making bevel cuts up to 50 degrees, offering versatility for both angled and straight cuts. This makes it suitable for various applications, whether you're working on framing, siding, or other woodworking projects.

Safety features are paramount in any power tool, and the Ryobi P542 does not disappoint. It includes a safety guard that provides protection while also allowing for quick blade changes. The electric brake feature stops the blade quickly after the trigger is released, enhancing user safety and reducing the risk of accidents.

Additionally, the P542 is part of Ryobi's ONE+ system, which means it is compatible with over 175 other Ryobi 18V tools. This compatibility not only saves money but also maximizes the utility of the battery platform, allowing users to easily switch batteries between tools.

Overall, the Ryobi P542 is a well-rounded circular saw that exhibits a combination of power, efficiency, and safety, making it a reliable choice for any woodwork enthusiast or professional contractor. With its advanced features and technologies, it stands poised to meet the demands of modern cutting tasks, ensuring high performance and satisfaction with every use.