OPERATION

ROUTING GROOVES IN A CIRCLE

See Figure 11.

nThere are three holes marked R2", R2-1/2", and R3" on the woodworking sub-base. Each number represents a radius and may be used when cutting circular grooves that are 4 in., 5 in. or 6 in. in diameter.

nSelect the radius for the desired circle, place a finish- ing nail through the hole and securely tack it into the workpiece. This will create a pivot axis for that size ra- dius.

nRout a circular groove in a clockwise direction only.

ROUTING GROOVES PARALLEL TO AN EDGE

See Figures 12 - 13.

You can use the scale provided on the woodworking sub- base accessory to cut a straight parallel line up to 1 in. from the edge of the workpiece.

nThe intersection of the horizontal and vertical lines at the center of the woodworking sub-base accessory indicates the center of the cutter. This is also the center of groove being cut.

nFor grooves more than 1 in. from the edge of workpiece, align the center of desired groove on the workpiece with the centerline on the woodworking sub-base accessory. Then measure from the centerline on the woodworking sub-base accessory to the guiding portion of the straight guide. Tighten the knob on the straight guide securely.

nUsing “C” clamps and a board to act as the straight edge, place the cutter at the desired position on the workpiece and make the cut from right to left.

NOTE: The board being used as a straight edge must be 1/4 in. thick to prevent contact with the trimmer base. It must also be at least as long as the workpiece in order to be a guide.

nThe thrust is from the trimmer against the straight edge.

nDo not make a cut that is too heavy in one pass. If a deep cut is required, make successive passes at increasing depths with each new pass until you reach the desired groove depth.

WARNING:

If the desired depth of cut is greater than can be safely cut in one pass, make cuts in two or more passes. Do not remove more than 1/8 in. in a single pass. Excessive depth of cut can result in loss of control and the possibility of serious personal injury.

ROUT GROOVE FROM RIGHT TO LEFT

R

3

2

 

 

 

R

1

R

2

 

2

 

 

 

 

1/4 1/ 3/42 1

Fig. 12

TRIM ROUTER USED WITH A BALL-BEARING GUIDED BIT

Fig. 13

15

Page 14 Page 16
Page 15
Image 15
Ryobi P600 manual Routing Grooves in a Circle, Routing Grooves Parallel to AN Edge, See Figures 12
Page 14 Page 16

P600 specifications

The Ryobi P600 is a dynamic and versatile power tool that has gained popularity among DIY enthusiasts and professionals for its innovative features and robust performance. This 18V cordless electric blower is designed for efficiency, making yard maintenance a breeze.

One of the standout features of the Ryobi P600 is its lightweight and compact design, which allows users to maneuver and operate the blower with ease. Weighing just under 5.5 pounds, it reduces fatigue during extended use, making it ideal for clearing leaves, grass clippings, and debris from driveways, sidewalks, and patios.

Equipped with a powerful motor, the P600 delivers impressive air speeds of up to 140 miles per hour. This ensures effective clearing, even in challenging conditions such as wet leaves. Its variable speed control allows users to adjust the blower's power output according to the specific task at hand, providing both precision and versatility.

The Ryobi P600 showcases advanced technology with its compatibility with the Ryobi 18V ONE+ system. This platform enables users to use the same battery across a vast range of Ryobi tools, reducing the need for multiple batteries and chargers. This not only saves money but also promotes convenience, as users can seamlessly switch between tools without downtime.

Another notable feature is its easy-to-use design which includes a comfortable grip and a user-friendly trigger. The lightweight body coupled with the ergonomic handle ensures a secure hold, making it easy to operate for extended periods without discomfort. The P600 also includes a built-in hanging hook for convenient storage when not in use.

Additionally, this blower operates quietly compared to gas-powered alternatives, making it a more neighborhood-friendly option. This design consideration reduces noise pollution while still providing the performance necessary for effective outdoor cleaning tasks.

In summary, the Ryobi P600 is a robust, efficient, and user-friendly electric blower that combines power and convenience. Its lightweight design, impressive air speed, and compatibility with the Ryobi 18V ONE+ battery system make it an excellent choice for homeowners and professionals alike. With innovative features and reliable performance, the P600 will undoubtedly enhance outdoor maintenance tasks while providing a comfortable experience for users.
Top Page Image Contents