![](/images/new-backgrounds/1332191/33219113x1.webp)
OPERATION
TO INSTALL BATTERY PACK
See Figures 3 - 4.
Place the switch trigger in the OFF position.
Place the battery pack in the spotlight.
Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the spotlight before beginning operation.
TO REMOVE BATTERY PACK
See Figures 3 - 4.
Place the switch trigger in the OFF position.
Locate latches on side of battery pack and depress both sides to release battery pack.
Remove battery pack from the spotlight.
WARNING:
Battery tools are always in operating condition. Therefore, switch should always be in the OFF position when not in use or carrying at your side.
SWITCH TRIGGER
See Figure 4.
To turn the spotlight ON, depress and hold the switch trigger. To turn it OFF, release the switch trigger.
See Figure 4.
The spotlight is equipped with a
To lock-on:
Depress the switch trigger.
Push in and hold the
Release the switch trigger.
Release the
To release the lock, depress and release the switch trigger.
WARNING:
Never leave the spotlight in the
P104 18V
BATTERY PACK
DEPRESS BOTH
LATCHES TO
RELEASE
ALIGN RAISED RIB ON
BATTERY PACK WITH
GROOVE IN BATTERY PORT
P100 18 V NICKEL
CADMIUM
BATTERY PACK
Fig. 3
BUTTON
SWITCH
TRIGGER
Fig. 4