MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center.

REPLACING BULBS

See Figures 5 - 7.

Over time, the bulb will burn out. When this occurs, replacing the bulb will be necessary. Be careful not to touch the bulb glass. This will reduce the life of the bulb.

To replace a bulb:

Remove battery from the spotlight and let it cool for at least 5 minutes.

Turn the bezel counterclockwise to remove.

Remove the reflector assembly from the spotlight housing.

Do not pull on the leads connected to the assembly.

Remove the white connection point from its nest in the housing.

Remove the white connection terminal from its connection point.

NOTE: Do not pull white lead without holding the connection point, as this may damage lead.

Remove the retainer pin from the reflector and remove bulb assembly. Bulb assembly may be rotated in reflector if needed to aid in removal.

Install new bulb assembly.

Replace bulb retainer pin.

Hold white connection terminal and reconnect white lead.

Return the white connection point to its nest.

Align tabs on each side of lens seal with notches on spotlight housing and seat lens seal in place.

Reattach bezel carefully by rotating clockwise.

Tighten securely.

NOTE: Always ask for replacement bulb H3 6V55W, number 019020001007.

REFLECTOR

LENS LENS SEAL

TO REMOVE

 

TO

NOTCHES

REPLACE

 

 

 

RIDGE

 

TABS

 

GROOVE

REFLECTOR

 

 

ASSEMBLY

BEZEL

 

Fig. 5

 

WHITE

CONNECTION

REFLECTOR

CONNECTION

POINT

TERMINAL

 

ASSEMBLY

 

 

RED

CIRCUIT

RETAINER LEAD

PIN

CONNECTION

POINT NEST

Fig. 6

Page 7 Page 9
Page 8
Image 8
Ryobi P715 manual General Maintenance, Replacing Bulbs, See Figures 5
Page 7 Page 9

P715 specifications

The Ryobi P715 is a versatile and powerful 18V one-handed reciprocating saw designed for both DIY enthusiasts and professionals alike. Known for its portability and ease of use, the P715 stands out in the Ryobi lineup, catering to a variety of cutting applications, including wood, plastic, and metal.

One of the main features of the P715 is its compact design, which allows for easy maneuverability in tight spaces, making it ideal for overhead or intricate cutting tasks. Weighing in at just under 5 pounds, it is lightweight, reducing operator fatigue during extended use.

The P715 is equipped with a powerful motor that delivers a stroke length of 7/8 inches, providing fast and smooth cuts. Its variable speed trigger allows users to adjust the cutting speed according to the material, improving precision and control. Additionally, the saw features a tool-less blade change system that allows for quick and effortless blade swaps, enhancing productivity.

An impressive characteristic of the Ryobi P715 is its built-in LED light, illuminating the work area for enhanced visibility, especially in dimly lit environments. This feature is particularly useful when working in closets, attics, or other confined areas.

The saw utilizes Ryobi's 18V battery platform, allowing users to interchange batteries with other tools in the Ryobi family. This compatibility promotes convenience and efficiency, enabling users to maximize their battery usage without being tied to a power outlet.

Safety features are also integrated into the Ryobi P715, including a molded rubber grip that provides comfort and prevention against slippage during operation. The saw’s design incorporates a safety lock to prevent accidental starts, a crucial aspect for maintaining user safety.

In summary, the Ryobi P715 combines innovative technology and user-friendly features into a robust one-handed reciprocating saw. With its lightweight design, powerful motor, variable speed control, and built-in LED light, this tool is a reliable choice for anyone looking to tackle various cutting tasks efficiently and safely. Whether you are a seasoned professional or a weekend warrior, the Ryobi P715 is poised to meet your cutting needs with ease.
Top Page Image Contents