MAINTENANCE

CAUTION:

Do not use a higher rated fuse other than the specified amperage. This could cause damage to the product.

REPLACEMENT FUSE

See Figure 8.

If the spotlight blows its fuse, you will need to replace it. Look for replacement fuses where you purchased this product.

Remove the battery pack from the spotlight to access fuse housing.

Remove the current fuse and discard. Use a pair of fuse pullers if necessary.

Use 10 amp JAT blade type automotive fuse to replace the blown fuse.

NOTE: Only use 10 amp JAT blade type automotive fuses for replacement. If second fuse blows, return to authorized service center for repair. Always ask for replacement fuse number 019020001013.

BATTERIES

This product will accept 18 V lithium-ion batteries or 18 V nickel-cadmium batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries for this product have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

For lithium-ion batteries:

Remove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 80°F and away from moisture.

Store battery packs in a 30%-50% charged condition.

Every six months of storage, charge the pack as normal.

For nickel-cadmium batteries:

Remove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 80°F.

Store battery packs in a “discharged” condition.

BULB

ASSEMBLY

RETAINER

 

PIN

Fig. 7

 

 

GOOD FUSE

FUSE

 

BLOWN FUSE

Fig. 8

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries ­properly.

Li - Ion

This product uses nickel-cadmium and

 

 

lithium-ion batteries. Local, state or

 

federal laws may prohibit disposal of

 

batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its compo- nents. Lithium-ion and nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

Page 8 Page 10
Page 9
Image 9
Ryobi P715 Replacement Fuse, Batteries, Battery Pack Removal and Preparation for Recycling, For lithium-ion batteries
Page 8 Page 10

P715 specifications

The Ryobi P715 is a versatile and powerful 18V one-handed reciprocating saw designed for both DIY enthusiasts and professionals alike. Known for its portability and ease of use, the P715 stands out in the Ryobi lineup, catering to a variety of cutting applications, including wood, plastic, and metal.

One of the main features of the P715 is its compact design, which allows for easy maneuverability in tight spaces, making it ideal for overhead or intricate cutting tasks. Weighing in at just under 5 pounds, it is lightweight, reducing operator fatigue during extended use.

The P715 is equipped with a powerful motor that delivers a stroke length of 7/8 inches, providing fast and smooth cuts. Its variable speed trigger allows users to adjust the cutting speed according to the material, improving precision and control. Additionally, the saw features a tool-less blade change system that allows for quick and effortless blade swaps, enhancing productivity.

An impressive characteristic of the Ryobi P715 is its built-in LED light, illuminating the work area for enhanced visibility, especially in dimly lit environments. This feature is particularly useful when working in closets, attics, or other confined areas.

The saw utilizes Ryobi's 18V battery platform, allowing users to interchange batteries with other tools in the Ryobi family. This compatibility promotes convenience and efficiency, enabling users to maximize their battery usage without being tied to a power outlet.

Safety features are also integrated into the Ryobi P715, including a molded rubber grip that provides comfort and prevention against slippage during operation. The saw’s design incorporates a safety lock to prevent accidental starts, a crucial aspect for maintaining user safety.

In summary, the Ryobi P715 combines innovative technology and user-friendly features into a robust one-handed reciprocating saw. With its lightweight design, powerful motor, variable speed control, and built-in LED light, this tool is a reliable choice for anyone looking to tackle various cutting tasks efficiently and safely. Whether you are a seasoned professional or a weekend warrior, the Ryobi P715 is poised to meet your cutting needs with ease.
Top Page Image Contents