ACCESSORIES

OPTIONAL STRAIGHT GUIDE

An optional straight guide, part number 6090080, is available and may be purchased for use with your router.

OPTIONAL DEPTH CONTROL KNOB

An optional depth control knob, part number 4830175, is available, which allows you to easily adjust the depth of cut when using the router mounted upside down to a router table.

ROUTER TABLE

When mounting your router to a router table, use the two 5/16-18 UNC-2A flathead screws supplied. These screws will secure your router to the router table properly. Use of any other type and size screws could result in an accident causing possible serious injury. Do not use 8 mm screws.

WARNING:

When using a UL listed router table, large router bits should be used for edging only. Do not use router bits that are larger in diameter than the opening in the router base for any purpose. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not use with router tables that are not UL listed and that fail to conform to safe woodworking practices and offer proper guarding for the cutter. Failure to comply can result in an accident causing possible serious injury.

WARNING:

The use of this router in table mounted applications requires the use of the optional depth control knob. Failure to use this optional depth control knob could result in an accident and possible serious personal injury.

23