OPERATION
UNPACKING | KNOW YOUR RECIPROCATING SAW | |
Your saw has been shipped completely assembled and | Before attempting to use your saw, familiarize yourself with all | |
ready for use. Inspect it carefully to make sure no breakage | operating features and safety requirements. See Figure 1. | |
or damage has occurred during shipping. If any parts are | ELECTRICAL CONNECTION | |
damaged or missing, contact your nearest Ryobi dealer to | ||
Your saw has a precision built electric motor. It should be | ||
obtain replacement parts before attempting to operate saw. | ||
An operator's manual and warranty registration are also | connected to a power supply that is 120 volts, 60 Hz, AC | |
included. | only (normal household current). Do not operate this tool | |
| on direct current (DC). A substantial voltage drop will cause | |
| a loss of power and the motor will over heat. If your tool does | |
| not operate when plugged into an outlet, | |
| power supply. |
VARIABLE SPEED
TRIGGER
BUTTON
FLAT HEAD SCREW
(FOR FLUSH CUTTING)
BASE
ASSEMBLY
ALLEN
WRENCH HOLDER
BLADE
ALLEN WRENCH
BLADEBLADE
CLAMPCLAMP
PINSCREW
| BLADE |
TRIGGER | CLAMP HOLE |
SET SCREW
(SECURES BASE ASSEMBLY) Fig. 1
ALLEN WRENCH HOLDER
A convenient feature on your saw is an allen wrench holder. It is located on the bottom portion of your saw's handle. It is
convenient for storing allen wrench when not in use. See Figure 1.
Page 5
