ASSEMBLY
TO ATTACH SAFETY SHIELD
See Figure 6
7.Place the 2 holders (M) onto hinge of safety shield (A). Insert the safety shield with both holders on the 2 small holes on tabletop. Attach 2 holders securely to tabletop with 2 pan head screws (Q). Use a #3 Phillips screw- driver to keep from stripping the screw heads.
ASSEMBLE THE MITER GUIDE
See Figure 7
8.Place the miter guide head (H) on top of the miter bar
(J). Assemble miter guide by threading carriage bolt (R) through miter bar (J). Place washer (V) and knob (L) on end of carriage bolt and tighten the knob.
Q (2)
A
M
Q
R (1)
V (1)
L
V
H
J
R
Fig. 7
| WARNING: |
| Before mounting the router make sure you have read |
Fig. 6 | and understood pages |
|
SECURING THE ROUTER TABLE
WARNING:
DO NOT use the router table unless it is firmly mounted to a stable work surface. Failure to securely mount the router table could lead to serious personal injury and/or property damage.
See Figure 8 |
| |
1. Secure router table to the work surface using wood |
| |
screws or sheet metal screws and washers (not pro- | Fig. 8 | |
vided) through the holes. | ||
|
11
