ASSEMBLY
TO ATTACH THE SWITCH BOX
See Figure 3
3.Place the router table on its legs.
4.Use a #2 Phillips screwdriver to attach switch box (P) to the switch box bracket with 3 self tapping screws (U).
See Figure 5
6.Attach left fence assemblies to tabletop using 4 carriage bolts (R), 4 washers (V) and 4 knobs (L). Make sure that the turned down flange fits snug against inside wall of provided groove in tabletop. Use a hammer to tap carriage bolts (R) until seated to the bottom of the tabletop.
U (3)
V (4)
R (4)
P
L
V
U
Fig. 3
R
TO ATTACH THE FENCES
See Figure 4
5. Attach left fence (D) to left fence base (E) using 2 coun- tersink screws (S) and 2 wing nuts (W). Repeat for right fence (B) and right fence base (C).
S (4)
W (4)
W
D
W
E 
C 
B
S
S
Fig. 4 | Fig. 5 |
10
