Ryobi RY30570, RY30931, RY30951 manual Fuel CAP, Spark Plug replacement, Storing the Product, Cover

MAINTENANCE

CLEANING AIR FILTER screen

See Figures 30 - 31.

For proper performance and long life, keep air filter screen	latch
clean.

Remove the air filter cover by pushing down on the latch with your thumb while gently pulling on the cover.

 Brush the air filter screen lightly to clean.

 Replace the air filter cover by inserting the tabs on the bottom of the cover into the slots on the air filter base; push the cover up until it latches securely in place.

air filter cover

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loos- ened, check valve may be faulty or filter clogged. Replace fuel cap if required.

pull cover

to open

Fig.30

latch

AIR FILTER

COVER

filter screen

SPARK PLUG replacement

This engine uses a Champion RCJ-6Y or NGK BPMR7A spark plug with .025 in. electrode gap. Use an exact re- placement and replace annually.

STORING THE PRODUCT

 Clean all foreign material from the product. Store idle unit indoors in a dry, well-ventilated area that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

 Abide by all ISO and local regulations for the safe storage and handling of gasoline.

When storing 1 month or longer:
 Drain all fuel from tank into a container approved for	Fig. 31
gasoline. Run engine until it stops.

24