Fisher & Paykel DD605 Dishwasher Manual: Troubleshooting and Fault Codes Guide

			599464
Fault	LED	Fault		Possible Causes
Code	Display
F2	Delicate	The controller		• Foreign object has jammed the
	LED.	has not		rotor.
		sensed the		• The rotor has failed.
		motor rotating.		• Hall sensor connector or wiring
				fault at hall sensor or
				controller.
				• The hall sensor has failed.
				• Motor stator winding or
				connection open circuit.
				• The electronic controller has
				failed.
				• PCB mains filter has failed.
F3	Delicate	The water		• The incoming water is greater
	and Rinse	temperature		than 85°C (185°F).
	LEDs.	has been		• The element has failed closed
		sensed as		circuit.
		greater than		• The temperature sensor on the
		85°C (185°F).		heater plate has failed.
				• The electronic controller has
				failed.
F4	Fast LED.	No		• The element is not connected.
		temperature		• The element has failed open
		increase has		circuit.
		been sensed		• The temperature sensor has
		for about 4		failed.
		hours while		• The electronic controller has
		the element is		failed.
		on.
F5	Fast and	Lid motor		• Lid jammed up or down.
	Rinse	current too		• The electronic controller has
	LEDs.	high during		failed.
		start.
F6	Fast and	Lid motors ran		• Lid actuator off yoke or slide.
	Delicate	but did not		• Yoke off lid.
	LEDs.	reach stall		• Faulty lid actuator.
		current.

19