Ryobi RY41140 General Maintenance, Spool Replacement, Line Replacement, Storing the Trimmer

Models: RY41140

1 40
Download 40 pages 8.54 Kb
Page 14
Image 14

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Before inspecting, cleaning, or servicing the machine, shut off motor, wait for all moving parts to stop, and disconnect extension cord. Failure to follow these instructions can result in serious personal injury or prop- erty damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Periodically, clean all foreign material from the trimmer head air vents.

You can often make repairs described here. For other repairs, have the trimmer serviced by an authorized service center.

SPOOL REPLACEMENT

See Figure 15.

Use only .065 in. diameter monofilament line. Use original manufacturer’s replacement line for best performance.

Unplug the string trimmer.

Push in tabs on side of spool retainer.

Pull spool retainer up to remove.

Remove spool.

To install the new spool, make sure the two lines are captured in the slots opposite each other on the new spool. Make sure the end of each line is extended approximately 6 in. beyond each slot.

Install the new spool so that the lines and slots align with the eyelets in the line head. Thread the lines into the eyelets.

Pull the lines extending from the line head so the line releases from the slots in the spool.

Reinstall the spool retainer by depressing tabs into slots and pushing down until spool retainer clicks into place.

LINE REPLACEMENT

See Figure 16.

Unplug the line trimmer.

Remove the spool from the line head.

NOTE: Remove any old line remaining on the spool.

Cut two pieces of line, each being approximately 9 ft. long. Use only .065 in. diameter monofilament line.

Insert the first line into the anchor hole in the upper part of the spool. Wind the first line around the upper part of the spool clockwise, as shown by the arrows on the spool. Place line in the slot on spool, leaving about 6 in. extended beyond the slot. Do not overfill. After winding the line, there should be at least 1/4 in. between the wound line and the outside edge of the spool.

Repeat above step with second line, using the bottom part of spool. Do not overfill.

Replace the plastic retainer, spool, and the spool retainer. Refer to Spool Replacement earlier in this manual.

STORING THE TRIMMER

Unplug the string trimmer.

Depress telescoping boom coupler and set at shortest setting.

Clean all foreign material from the trimmer.

Store it in a place that is inaccessible to children.

Keep away from corrosive agents such as garden chemicals and de-icing salts.

Page 10 — English

Page 14
Image 14
Ryobi RY41140 manuel dutilisation General Maintenance, Spool Replacement, Line Replacement, Storing the Trimmer

RY41140 specifications

The Ryobi RY41140 is a robust battery-powered electric string trimmer designed for homeowners and gardeners who value efficiency and convenience without compromising performance. This tool, part of Ryobi's extensive line of lawn care products, is particularly noted for its features that cater to various trimming needs.

One of the standout features of the RY41140 is its 40V lithium-ion battery system. This technology ensures that users experience longer run times and consistent power during operation. The battery not only allows for extended periods of use without the hassle of cords, but it also charges quickly, making it an excellent choice for those who have a lot of ground to cover. Additionally, the battery is compatible with a wide range of other Ryobi 40V tools, adding versatility to your tool collection.

The RY41140 boasts a powerful 13-inch cutting width, which allows users to tackle larger areas efficiently. This trimmer is equipped with a high-performance brushless motor that improves runtime and enhances durability, making it capable of handling even tough grass and weeds. The ability to adjust the speed settings also provides users with greater control over their trimming tasks, allowing for tailored performance depending on the density and type of vegetation.

Ergonomics have also been a focal point in the design of the Ryobi RY41140. The trimmer features an adjustable telescoping shaft that enables users to find a comfortable height for operation, reducing strain during extended use. Furthermore, the comfortable grip handle enhances user control and maneuverability, helping to prevent fatigue.

Another notable feature of the RY41140 is its easy-load string head. This design allows for quick and efficient line changes, minimizing downtime and ensuring that users can continue their work without interruptions. The dual-line bump feed system automatically feeds additional line as needed, making it even more user-friendly.

Safety is also considered in the design of the RY41140, with an integrated safety guard that protects the user from any flying debris while operating the trimmer. Overall, the Ryobi RY41140 electric string trimmer combines power, efficiency, and user-friendly features, making it a top choice for anyone looking to maintain their lawn and garden effectively. Whether for routine maintenance or tackling overgrown areas, the RY41140 stands out as a reliable tool in any homeowner's landscaping arsenal.