SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL | NAME | EXPLANATION | |
| Safety Alert Symbol | Indicates a potential personal injury hazard. | |
| Read the Operator’s | To reduce the risk of injury, user must read and | |
| understand operator’s manual before using this | ||
| Manual | ||
| product. | ||
|
| ||
| Wear Eye and Head | Always wear eye protection with side shields | |
| marked to comply with ANSI Z87.1, along with | ||
| Protection | ||
| head protection. | ||
|
| ||
| Wet Conditions Alert | Do not expose to rain or use in damp locations. | |
| Keep Bystanders Away | Keep all bystanders at least 50 ft. away. | |
| Gloves | Wear | |
| handling the pole saw and the blade. | ||
|
| ||
| Safety Footwear | Wear | |
| equipment. | ||
|
| ||
| Keep Tool Away from Electri- | DANGER! Risk of electrocution! Keep tool 50 feet | |
| cal Lines/Keep Bystanders | away from electrical lines. Keep all bystanders at | |
| Away | least 50 ft. away. | |
| Electric Shock | Failure to use in dry conditions and to observe safe | |
| practices can result in electric shock. | ||
|
| ||
| No Hands Symbol | Failure to keep your hands away from the blade will | |
| result in serious personal injury. | ||
|
| ||
V | Volts | Voltage | |
A | Amperes | Current | |
Hz | Hertz | Frequency (cycles per second) | |
W | Watt | Power | |
hrs | Hours | Time | |
no | No Load Speed | Rotational speed, at no load | |
| Class II Construction | ||
.../min | Per Minute | Revolutions, strokes, surface speed, orbits etc., | |
per minute | |||
|
|
Page 6 — English
