FEATURES
KNOW YOUR COMPOUND MITER SAW
See Figure 2.
Before attempting to use your saw, familiarize yourself with all operating Features and Rules for Safe Operation.
WARNING:
Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
CUTTING CAPACITIES
When the miter angle (miter table) is set at 0° and the bevel angle is set at 0° :
Your saw will cut materials up to a maximum of
When the miter angle (miter table) is set at 45° and the bevel angle is set at 0° :
Your saw will cut materials up to a maximum of
15 AMP MOTOR
Your saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings.
10 in. BLADE
A 10 in. (254 mm) saw blade is included with your compound miter saw. It is fine for most wood cutting operations, but for fine joinery cuts or cutting plastic, use one of the accessory blades available from your nearest Ryobi dealer.
UPPER
BLADE GUARD
DUST GUIDE
BEVEL
LOCK KNOB
0
MITER
FENCE
45
BLADE 
WRENCH
31.62
When the miter angle (miter table) is set at 0° and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
When the miter angle (miter table) is set at 45° and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
SAW ARM
SWITCH TRIGGER
LOWER
BLADE GUARD
BEVEL | MITER TABLE |
SCALE |
"NO HANDS ZONE"
LABEL
"NO HANDS ZONE" 
BOUNDARY LINE
| . | MITER SCALE |
| 5 |
|
| 4 |
|
| 62 |
|
| 31 |
|
| 30 |
|
| .5 |
|
| 2 2 |
|
| 15 | ZERO CLEARANCE |
| 0 | |
30 | 15 | THROAT PLATE |
| 22.5 |
|
|
| MITER |
|
| LOCK PLATE |
| CONTROL ARM | MITER | |
| LOCK HANDLE | ||
MITER | POSITIVE STOP(S) | ||
| |||
TABLE FRAME |
| Fig. 2 | |
|
| ||
| Page 9 |
|
