FEATURES
CARRYING HANDLE
See Figure 3.
For convenience when carrying or transportating your miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 3. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin.
MITER LOCK HANDLE
See Figure 3.
The miter lock handle securely locks your saw at desired miter angles.
LOCK-OFF LEVER
See Figure 4.
The switch trigger is equipped with a
SPINDLE LOCK BUTTON
See Figure 4.
A spindle lock button has been provided for locking the spindle of your saw in a stationary position. Depress and hold the lock button while installing, changing, or removing blade.
TRIGGER LOCK
See Figure 5.
To prevent unauthorized use of your compound miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock through the hole in the switch trigger. A lock with a shackle up to 13/64 in. (5 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0° ,
BEVEL LOCK KNOB
The bevel lock knob securely locks your compound miter saw at desired bevel angles. Positive stop adjustment screws have been provided on each side of the saw arm. These adjustment screws are for making fine adjustments at 0° and 45° .
ELECTRIC BRAKE
An electric brake has been provided to quickly stop blade rotation after the switch is released.
FENCE
The fence on your compound miter saw has been provided to hold your workpiece securely against when making all cuts.
CARRYING
HANDLE
SAW
ARM
|
| LOCK |
|
| PIN |
2 |
|
|
0 |
|
|
10 |
|
|
0 |
|
|
10 |
|
|
20 |
|
|
30 |
|
|
40 | 45 |
|
|
| |
MITER LOCK |
|
|
HANDLE |
|
|
SAW ARM |
|
|
LOCKED IN DOWN POSITION |
| Fig. 3 |
|
| |
SPINDLE LOCK BUTTON |
| |
LEVER 
SWITCH
TRIGGER
Fig. 4
SWITCH 
TRIGGER
PADLOCK
Fig. 5
