Safety and International Symbols, Oil | Ryobi Outdoor 875r instruction

RULES FOR SAFE OPERATION

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOLMEANING

•SAFETY ALERT SYMBOL

Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.

•WARNING - READ OPERATOR'S MANUAL

Read the Operator’s Manual(s) and follow all warnings and safety instructions.

Failure to do so can result in serious injury to the operator and/or bystanders.

•FOR SERVICE INFORMATION, CALL:

USA: 1-800-345-8746

CANADA: 1-800-265-6778

•WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit.

•KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m.) from the operating area.

•PRIMER BULB

Push primer bulb, fully and slowly, 5 to 7 times.

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

•OIL

Refer to operator's manual for the proper type of oil.

6

Image 6

Ryobi Outdoor 875r Safety and International Symbols, Symbolmeaning Safety Alert Symbol, For Service INFORMATION, Call, Oil

Contents

OPERATOR’S Manual Table of Contents Introduction California Emission Regulations Spark Arrestor Rules for Safe Operation Symbol MeaningSafety Warnings for GAS Trimmers Before Operating Other Safety Warnings While Operating For Service INFORMATION, Call Safety and International SymbolsSymbolmeaning Safety Alert Symbol Unleaded Fuel ON/OFF Stop Control HOT Surface WarningSharp Blade Choke Control Know Your Unit Applications Assembly Instructions Adjusting the J-HANDLE OIL and Fuel Information Recommended OIL TypeAdding OIL to Crankcase Initial USE Recommended Fuel Type Using Blended FuelsUsing Fuel Additives Fueling Unit Stopping Instructions STARTING/STOPPING InstructionsStarting Instructions Cold Start First Start of the Day or Engine Ran Out of Fuel Operating the CLICK-LINKSYSTEM Installing the Cutting Attachment or Add-OnsOperating Instructions Removing the Cutting Attachment or Add-Ons Adjusting Trimming Line Length Holding the TrimmerTips for Best Trimming Results Frequency Maintenance Required Refer to Maintenance and Repair InstructionsMaintenance Schedule Decorative Trimming Line Installation for the Speedspool Winding the Inner Reel With New Line Installing a Prewound Reel Releasing the Inner Reel Speedspool Replacement Parts Cleaning the Speedspool Checking the OIL Level Changing the OIL AIR Filter Maintenance Cleaning the Air Filter Adjust Idle Speed Screw Carburetor AdjustmentClean Air Filter Check Fuel Rocker ARM Clearance Remove the rocker arm cover and gasket Rocker Arms Adjusting Nuts Feeler Gauge Gasket Spark Arrestor Maintenance ACCESSORIES/REPLACEMENT PartsReplacing the Spark Plug Storage Cleaning and StorageCleaning Long Term Storage Troubleshooting U S ET I O N Specifications EnginePage Owners Warranty Responsibilities Manufacturers Warranty Coverage OPERATOR’S Manual Part no REV. a