| FEATURES |
PRODUCT SPECIFICATIONS |
|
Engine Size | 25.4 cc |
Engine Output | 1.2 HP |
Sand Tank Capacity | 13 lbs. |
THROTTLE |
| RECOIL |
|
LEVER |
| START | |
|
| STARTER | |
|
|
| LEVER |
ENGINE |
|
|
|
SWITCH |
|
| FUEL TANK |
|
|
| |
|
| PRIMER |
|
|
| BULB | TINE |
|
|
| |
|
|
| SHIELD |
JUST ADD SAND™ |
|
|
|
| DRAG BAR | HITCH |
|
|
|
| |
|
| PIN |
|
|
| WHEEL |
|
OUTER |
| ASSEMBLY |
|
TINE | OUTER | ACCESSORY |
|
|
|
| |
INNER TINES | TINE |
|
|
|
| Fig. 1 | |
|
|
|
KNOW YOUR CULTIVATOR
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
PRIMER BULB
The primer bulb pumps fuel from the fuel tank to the carburetor. This is necessary only when starting a cold en- gine or after refueling an engine that has run out of fuel.
ENGINE SWITCH
The engine switch controls the ignition system. The switch must be in the ON ( I ) position for the engine to start and run. To stop, place the switch in the OFF ( O ) position.
JUST ADD SAND™
Putting sand in the sand tank allows greater stability when operating the cultivator, and also gives added weight to the ma- chine, allowing it to cultivate with less effort and vibration.
RECOIL STARTER
The recoil starter is used for starting the engine.
START LEVER
The start lever opens and closes the choke valve in the carburetor. The START position enriches the fuel mixture for starting a cold engine. The RUN position provides the correct fuel mixture for normal operation after starting, or for restarting a warm engine.
THROTTLE LEVER
The throttle lever controls the rotation speed of the tines. Completely engage the throttle lever while cultivating.
7
