C |
|
Intenza Aroma System AB | 2 3 4 Machine Water Hardness Setting |
| 1 |
ENGLISH 17
Measuring and Programming Water Hardness
Water hardness measuring is very important in order to define the machine descaling frequency and to install the “INTENZA+” water filter (for more details on the water filter, see next chapter).
To measure the water hardness follow the steps below:
Immerse the water hardness test strip (supplied with the machine) in water for 1 second.
Note:
The test strip can only be used for one single measurement.
Wait for one minute.
Check how many squares have changed to red, then consult this table.
Note:
The numbers on the water hardness test strip correspond to the water hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the “INTENZA+” water filter (see next chapter).
Press the “
” button to access the machine main menu.
