Saeco Coffee Makers SUP 016 manual Temperature selection

item “VENDING” and select it through the " ENT key. From the displayed submenu it is possible to select one of the following items by

options “ON”, “OFF”.

83 PROGRAMMING THE MACHINE

84 PROGRAMMING THE MACHINE

The keys allow you to change the set options “ON” or “OFF”.

Temperature selection

With Royal Cappuccino a precise adjustment of the coffee temperature can be executed. Move the asterisk at the end of the line to the menu items

“Temp. l. coffee”, “Temp. coffee” or

time saving whenever the machine is often used. This function is not recommended in all other cases, because fresh ground coffee is by far better.

Press keys to move the asterisk to item

“PREGRINDING”. Press ENT to activate this function.

Press keys	to move the asterisk to item		The following message will be displayed:
“PROG.CAPUC.”. Press ENT to activate this			"STANDBY		"
function:
			"AFTER 0:00		"
The following message will be displayed:
	"11 PROG. CAPUC.	"	By means of the same keys	, select the
	"ON	"	suitable time and confirm the value throughENT
			button.

“Temp. s. coffee” and select it by means of the ENT key.

Depending on the selection, the following messages will be displayed:

"5 TEMP. L. COFFEE"

"MEDIUM "

The following message is displayed:
"9 PREGRINDING	"
"ON	"

The keys allow you to change the set

The keys allow you to change the set options: “ON”, “OFF”.

Coffee counter

Press keys to move the asterisk to item “TOTAL COFFEE” and select it by means of the

When the selected time is over the following message is displayed:

"ENERGY "

"SAVING "

	"6 TEMP. COFFEE	"	Hot water programming
	"MEDIUM	"
			Whenever this function is enabled, the selected
	"7 TEMP. S. COFFEE"		water amount is constantly dispensed. On the
			contrary, whenever this function is disabled hot
			water is dispensed until the user stops the
The keys	allow you to change the set options		dispensing. Hot water amount can only
“Minimum”, “maximum”, “high”,			be programmed with programming
			mode enabled.
“medium” or “low”.
Prebrewing function			- “PROG. H. WATER”. Press ENT to activate
As soon as the coffee has been moistened, the			this function.
pump stops for a while in order to allow a better			The following message will be displayed:
utilization of the coffee powder.
Move the asterisk at the end of the line to the

ENT key. The following message will be displayed:

"12 TOTAL COFFEE "

"XX"

This value cannot be modified. Quit the menu by means of the ENT or ESC keys.

Descaling

Move the asterisk at the end of the line to menu item “Descaling” and select it by means of the ENT key.

The following message will be displayed:

The machine stops and can be switched on again by means of button “standby”.

Vending functions

Royal Cappuccino is equipped with a counter allowing the machine statistic analysis while detecting the different dispensing operations. It is also equipped with another counter which is able to stop the dispensing operations after a certain number. These functions are protected by a special access code.

By means of keys move the asterisk to

menu item “PREBREWING” and select it by			"10 PROG. H. WATER"
means of the ENT key.			"ON	"
The following message will be displayed:
"8 PREBREWING	"	The keys	allow you to change the set
		options: “ON”, “OFF”.
"ON	"

"13 DESCALING

For descaling procedure, see page 92.

Timer

The timer enables the automatic switching off of the machine after a preset period, which can be

means of the same keys . On the contrary,

if the hot water selection key is pressed, the submenu can be quit.

The following messages will be displayed:

The keys allow you to change the set

options “ON”, “OFF”,“LONG” (in the latter case the pump stop is longer).

Pre-grinding function

By activating this function, grinding occurs every time the doser is empty. So a ground coffee portion is always ready in the doser, allowing a

Cappuccino programming

Whenever this function is enabled, the same amount of cappuccino is constantly dispensed. On the contrary, whenever this function is disabled, cappuccino is brewed until the user stops the dispensing. Cappuccino amount can only be programmed with programming mode enabled.

set from 15 minutes to 12 hours after last dispensing. If after a few seconds coffee is brewed again, the timer is reset. If the value set is 0:00, the timer function is not activated and the machine does not switch off.

Move the asterisk at the end of the line to menu

item “Timer” by means of the keys . Press ENT to select this item.

"CODE"

"****"

"1 LARGE COFFEE	"
"TOTAL	"
"1 COFFEE	"
"TOTAL	"