Sage Software 5.8 - page 43

Setting Up a Connection
My Connection – Page One
Page two of the My Connection screen is displayed. The default settings on
this page should be suitable, but you can change them if you wish.
My Connection – Page Two
6. Click on the Finish button.
7. Open the Modem Connections screen and click on the Dialing tab at the
bottom of the page.
8. Make sure that the values in the Local Settings fields are correct, and click
the Dialing Patterns button.
Modem Connections screen
9. From the Dialing Patterns screen, complete the dialing patterns fields.
The example below specifies that for local calls, the WAP phone will dial "0"
then the area code and phone number specified in Step 6.
Wireless Mobile Guide 5–3