PFD4/PFS4 – OPERATING INSTRUCTIONS

Before dismantling the pump, check the following:

∙The air/nitrogen supply is OFF,

∙The chemical and discharge lines are empty, and there is no pressure,

∙All in line valves are closed,

∙You follow your local Health and Safety regulations with regard to particular chemicals.

V.2 – Preventive maintenance

Important: for “W” pumps, PTFE body seals (P/N 2593, Mark C) and PFA manifold seals (P/N 2592, Mark F) must be changed each time you disassemble the pump. For “G” pumps, PTFE body seals (P/N 2593, Mark C) must be changed each time you disassemble the pump.

Retighten manifold nuts simultaneously and progressively with a strap wrench in order to ensure a correct tightness.

V.2.1 – Continuous operation

When the pump is used continuously, it is necessary to replace the following parts every year:

∙

Central shaft O.rings

P/N 2496

∙

Central shaft

P/N 2477

Important: the central rod and central rod O.rings should always be replaced together. During routine maintenance checks, examine the following parts, and change them if necessary:

∙

Bellows

P/N 6530 (PFD) or 2309S (PFS)

∙

Shuttle valve system

P/N 2493

∙

Viton bellows O.rings

P/N 4813

∙

FEP body O.rings

P/N 2491S

∙

Manifold O.rings

P/N 2632S and 2632K

∙

Suction lip seals

P/N 2629 (PFD) or 2629A (PFS)

∙

Delivery lip seals

P/N 2630 (PFD) or 2630A (PFS)

∙

Check valves

P/N 2633

∙

Silencers

P/N 2494

V.2.2 – Intermittent operation

If the pump is used intermittently, it is advised to replace all wearing parts every 18 months (shaft composite rings and central shaft) and to check other parts (bellows, shuttle valve system, other O.rings, lip seals...).

If the pump is left standing full of chemical for long periods all the Viton O.rings should be replaced.

V.3 – Comments

If the pump is used to pump hot chemicals in excess of 140°F (60°C) the preventive maintenance schedule time scale should be divided by 2:

∙Every 6 months check as for continuous operation,

∙Every 9 months check as for intermittent operation.

The above is based on SGPPL ASTI’s experience.

SGPPL ASTI cannot be held responsible for premature failures if the pump is misused, or damaged due to an incorrect application.

6/8

INDEX

DATE

N°

03

22/04/02

DC04020US

Page 6 Page 8
Page 7
Image 7
Saint Gobain Vidros PFS4, PFD4 manual Intermittent operation, Comments
Page 6 Page 8

PFS4, PFD4 specifications

Saint-Gobain Vidros is a prominent name in the glass manufacturing industry, recognized for its innovative and high-quality products. Among its notable offerings are the PFS4 and PFD4 glass types, which are designed to meet the diverse needs of modern architecture, energy efficiency, and sustainability.

The PFS4 (Premium Float Solar) glass is specifically engineered for applications where solar control is crucial. It features a low solar heat gain coefficient, allowing buildings to minimize cooling energy consumption during warmer months. This glass type is particularly advantageous for large commercial buildings with extensive glazing areas. The PFS4 glass is also treated with advanced coatings that enhance its performance by reflecting unwanted solar radiation while permitting a substantial amount of natural light to enter, creating a comfortable and well-lit indoor environment.

On the other hand, the PFD4 (Premium Float Double) glass caters to energy efficiency and superior thermal insulation. This double-glazed solution offers enhanced acoustic performance and thermal resistance, making it an ideal choice for residential and commercial buildings in noisy or extreme climates. With its unique combination of air or argon gas fill between the glass panes, the PFD4 effectively reduces heat loss in winter and minimizes heat gain in summer, contributing to lower energy bills and reduced environmental impact.

Both PFS4 and PFD4 incorporate cutting-edge technologies that align with the global trend towards eco-friendly building practices. These glass products are manufactured using sustainable processes, and they fulfill stringent environmental standards. They not only ensure safety and durability but also promote reduced energy consumption and greenhouse gas emissions.

Additionally, the aesthetic appeal of both glass types cannot be overstated. Leaders in contemporary design often select these products for their clarity and ability to blend seamlessly into various architectural styles. The low-reflective quality of PFS4 combined with the noise reduction capabilities of PFD4 makes them versatile choices for any project.

In summary, Saint-Gobain Vidros PFS4 and PFD4 glass types stand out in the glass industry for their commitment to quality, innovation, and sustainability. Whether for enhancing energy efficiency, acoustic comfort, or aesthetic value, these products provide cutting-edge solutions that cater to the modern demands of architecture and construction. By opting for PFS4 and PFD4, builders and architects can ensure a harmonious balance between functionality and design, paving the way for more sustainable and beautiful structures.
Top Page Image Contents