Configuring your controller
To open the R660 GTForce Feedback Wheel panel,
click on the Windows Start icon, then select Settings,
Control Panel, Games Controllers. Highlight R660 GT
Force Wheel and click on Properties. This will open the
panel to the right.
Test
The Test screen shows you whether your controller is
working correctly. Moving your controller and pressing
the various buttons should result in a response
onscreen.
Force
Click on the Force tab to adjust the strength of the force
feedback on your controller. The Default Gain slider will
adjust the amount of force feedback felt through the
controller.
The Spring Gain slider will adjust the strength of harsh effects such as crashes or bumps.
The Damper Gain slider will adjust the strength of softer effects such as cornering resistance.
The Default Spring setting affects the centering mechanism of the controller. Check the Always On
box so the motors in the controller will return the wheel
to centre if you let go of the wheel when you have
turned it in a direction; unchecking this box means that
the wheel will not centre itself. Please note that the
force feedback effects will feel slightly stronger if this
box isn't checked. The slider allows you to adjust the
strength with which the wheel will centre itself if the
Always On box is ticked.
Deadzones
The Deadzones tab allows you to change how far you
move the wheel or pedals before they have an effect.
Increasing the X Axis deadzone means you have to turn
the wheel more to the left or right before it steers your
car left or right.
Increasing the Gas and Brake deadzones means you
have to press down further on the pedals before they
increase power or apply brakes.
Technical Support
Nearly all the products that are returned to us as faulty are not faulty at all - they have just not
been installed properly. If you experience any difficulty with this product, please first visit our
website www.saitek.com. The technical support area will provide you with all the information you
need to get the most out of your product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question, please
contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and
thorough technical support to all our users so, before you call, please make sure you have all the
relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical Support
Center sheet that came packaged with this product.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and;
2 This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected;
• Consult the dealer or an experienced radio/TV technician for help.
Saitek Industries, 2295 Jefferson Street, Torrance, CA90501, USA