BLENDER OPERATING INSTRUCTIONS

1.Place Motor Housing on a dry level surface.

2.Be sure OFF Button is depressed. Plug the cord into an AC wall outlet.

3.Place completely assembled Blender (Blending Jar, Rubber Seal Ring, Blade Assembly and Collar) on Motor Housing.

NOTE: For blending hot ingredients, remove Measuring Cup to allow for heat expansion before blending. Place a small rag or paper towel over opening to prevent hot liquids from splashing out.

CAUTION: To prevent the risk of burns, do not use your hand to cover opening!

4.Add ingredients to Blending Jar as directed by your recipe.

5.Place Cover with Measuring Cup on Blending Jar. Remember to always hold Cover in place during processing.

6.Select the desired Speed Control.

7.Press either HIGH or LOW Control Button. The LOW Button produces speeds printed above the Buttons (Speeds 1-5). The HIGH Button produces speeds printed below the Buttons (Speeds 6-10).

8.Speeds with LOW printed above the Buttons will process ingredients as long as you press the Button and will stop processing when the Button is released.

9.For continuous processing, press any Speed Button that does not have LOW above it. To stop processing, press the OFF Button.

10.CAUTION: Keep hands and utensils out of the Blending Jar while blending to prevent the possibilities of severe injury to persons or damage to the unit. A spatula may be used but must only be used when the unit is not running.

5