Venturi Tube Opening
Figure 3

Before First Use

1.Remove the grill and any packaging materials from the shipping carton.

2.Place the Carrying Case on a flat, level surface.

3.Press in on both Snap Locks to open the Carrying Case. Raise the Carrying Case cover, remove the grill assembly and set the Carrying Case to the side.

4.Raise the Grill Lid, remove the Drip Tray, Regulator Assembly. and Grill Plate.

5.Wipe the Grill Body and Lid with

a damp cloth to remove any

 

Handle

Thumb

 

dust. Wash the Grill Plate and

Spacer

Drip Tray in warm, soapy water.

Screw

Lid

Rinse and dry thoroughly.

 

6. The Handle and mounting hard-

 

 

ware, (Thumb Screws and

 

 

Spacers) are shipped assem-

 

 

bled in an inverted fashion,

 

 

requiring minor reassembly.

 

Figure 1

Remove the Handle and Spacers

 

 

 

from the inside of the Lid by

 

 

loosening and removing both

 

 

Thumb Screws. Reposition the

 

 

Handle and Spacers on the top

 

 

of the Lid. From the inside of the

 

 

Lid, thread the Thumb Screws

 

 

through the Lid and into the

 

 

Spacers and Handle. Securely

 

 

tighten each Thumb Screw. See

 

Lock

Figure 1.

 

 

Pin

7. Close the Lid, pull out on the

 

 

 

Lock Pin rings and swing the

 

 

Legs out from beneath the Grill

 

 

Body. The Lock Pins will lock

 

Figure 2

into position with a "click". See

 

Figure 2.

 

 

8. Slide the Drip Tray into the slots

 

 

in the back of the Grill Body.

 

 

9. Raise the Lid and place the Grill

 

 

Plate on the Grill Body.

 

 

10.Pinch the Regulator Spring Clip together and insert the Regulator Assembly into the

venturi tube opening on the right side of the Grill Body. Release the Regulator Spring Clip and pull back slightly on the Regulator Assembly to set the

Regulator Spring Clip into position. See Figure 3 for details.

8