Speed 1 on the Variable Speed Dial is the slowest and speed 5 is the highest.
NOTE: The Power Button must be kept depressed for the duration of use.
5.Move the hand blender gently in an up and down motion, until the mixture is at the desired consistency. If an extra boost of power is required when blending, push the Turbo Button.
NOTE: The Power Button must be released when selecting the Turbo Button.
6.Once ingredients have reached the desired consistency, release the Power or Boost Button and turn the Variable Speed Dial at the top of the Motor Body to ‘1’.
7.Wait until the motor has completely stopped before lifting the hand blender out of the measuring cup.
8.Unplug from the wall outlet.
9.To detach the Blending Attachment, hold the Motor Body with one hand. Using your thumb and finger, push the button on either side of the Motor Body while holding the Blending Attachment with the other hand. Pull the Motor Body away from the Blending Attachment until the two pieces separate.
NOTE: If food gets lodged around the Blade or the Blade Guard, unplug the unit from the wall outlet and use a spatula to dislodge the food. The Blade is very sharp. DO NOT use your fingers.
IMPORTANT: NEVER immerse the hand blender past the length of the Blending Attachment. DO NOT immerse beyond the seam of the Blending Attachment. NEVER immerse the Motor Body into any liquid or mixture.
HELPFUL HINTS
•To use the Blending Attachment in a saucepan, be sure to remove the pan from the stove as the Blending Attachment is not designed for use over a heat source.
•When blending in
5
