Operating the C•que 8

C•que 8 CHANNELS

6Headphone Output

The C•que 8’s Headphone Output jack accepts a standard 1/4” TRS connector for easy interface with most professional headphones. Once the master VOLUME has been set, the channels output level is set by the VOLUME knob.

7 EQ Shape

7

8

9

6

Each of the four C•que 8 channels features an EQ SHAPE switch allowing individual equalization contour for each channel. When the EQ SHAPE switch is in, the LED will illuminate indicating the EQ SHAPE circuit is engaged. The EQ SHAPE circuit provides a pre-set equalization curve designed to sound good on most program music. In this mode, the low frequencies have a 6dB boost at 100Hz and the high frequency are boosted 6dB at 12kHz. When the EQ SHAPE switch is in the out position, frequency response of the channel is flat.

CH 1

 

CH 1

CH 2

 

 

 

 

 

OL

 

 

 

0

SHAPE OUT

0VOLUME10

-6

 

 

 

-12

SHAPE OUT

 

 

-18

 

 

 

 

 

 

-24

CH 2

0

10

 

 

VOLUME

 

8 VOLUME Control

The channel VOLUME control is used to adjust the channel headphone output. The volume control will adjust the level of the front panel headphone outputs, as well as that channel’s rear panel headphone outputs.

9 CHANNEL LEVEL Meter

Each C•que 8 Channel has an 6 segment, LEDlevel meter which monitors the output of the channel in Decibels (dBs) –24 toOL (overload). If the LEVEL meter displays an OL signal, then turn down the channel VOLUME, and if necessary, also turn down the master VOLUME .

8