ENGLISH
17
Using the Optional SP04 Shock-Mount

Using the Optional SP04

“Spider” Shock-Mount

For additional isolation the G Track
can be fitted on the optional SP04
“Spider” shock mount. Follow the
steps below the to install the SP04.
First, screw the SP04 shock mount
onto your mic stand or boom arm.
If you’re using a US 5/8” mic stand
or boom, remove the Euro adapter.
Remove the G Track swivel mount
by rotating the threaded collar
counterclockwise as shown in fig-
ure 1.
Install the G Track into the SP04
by fitting the microphone into the
center of the web, positioning the
G Track onto the bottom mounting
plate.
Secure the SP04 by reinstalling the
threaded collar, rotating clockwise
until tight. (Figure 2)
Now, loosen the thumb screw to
adjust the angle of the microphone
and position the G Track to the
desired location. Once set, tighten
the thumbscrew to secure the
microphone in place.
Note: Be careful not to cross
thread or over tighten the thread-
ed collar or thumb screw.