Samson MDR624 UP SET RECORDING MDR624

This system shows the MDR624 in a recording set up with the LEFT and RIGHT CONTROL ROOM outputs hooked up to powered studio monitors and the AUX SEND feeding a headphone mix sent to a Samson S•phone headphone amp. For inputs, a microphone is connected to channel 1’s low- impedance input, and the output of the Bass Direct Box is also connected to the Low- Impedance input on channel

2.The Keyboards, as well as the Lead Guitar’s signal proces- sor's outputs, are connected to the MDR624s line inputs.

UP SET RECORDING MDR624

Ups-Set System MDR624

Contents

SIX CHANNEL MIXER Page Introduction MDR624 Features Controls and Functions MDR624 Input and Output Connections Operating the MDR624 Page Page Front and Rear Panel Layout FRONT PANEL REAR PANEL MONO INPUT CHANNEL SECTION GAIN 1 G CHANNEL EQUALIZER AUX SEND BALANCE (Stereo Inputs Only) PAN (Mono Inputs Only) PEAK LED FADER 8MAIN LEVEL CR / PHONES 2 TRACK INPUT AND OUTPUT 2TK TO CR 2TK TO MIX 12POWER LED 13- Phantom Power LED Output Level Meter Auxiliary Return AUX RET Microphone Input - Mono Input Channels Line Level Input - Mono Input Channels Line Level Input - Stereo Input Channels MASTER SECTION INPUT AND OUTPUT JACKS 19 AUX Send AUX RETURN LEFT/RIGHT CONTROL ROOM LEFT/RIGHT OUTPUT MIX LEFT/RIGHT OUTPUT BASIC OPERATION CONNECTING MICROPHONES AND INSTRUMENTS NOTE : SETTING THE INPUT GAIN LAST ON, FIRST OFF SENDING AN INDEPENDENT MIX TO THE MONITOR SPEAKERS USING AN EXTERNAL EFFECT PLAYING BACK A CD USING 2T TO MIX RECORDING A MIX FROM THE MDR624 UP-SETSOUND LIVE MDR624 UP SET RECORDING MDR624 CONNECTING THE MDR624 Unbalanced 1/4” Connector Balanced TRS 1/4” Connector XLR Balanced Wiring Guide Mono input channels Stereo input channels Impedances Equalization Main Mix Section