Basic Set Up
The RSX loudspeakers are passive cabinets, which means that they need to be connected to a power amplifier to reproduce an audio signal. Each speaker cabinet features parallel connectors which enable each cabinet to be daisy chained to an additional loudspeaker. When connecting multiple speakers to a power amplifier or powered mixer, you must pay attention to the mini- mum load impedance of the amplifier. Most amplifiers can safely provide power to loudspeakers with a minimum load impedance of 8 or 4 ohms. The RSX loudspeakers are rated at 8 ohms. This means if two RSX cabinets are wired in parallel, the nominal impedance of the speaker system will be 4 ohms.
SX 1800
400 W |
|
600 W |
|
Left Output | Right Output |
Mono/Sub Output
SX 1800 |
400 W |
600 W |
RSX Passive Loudspeakers | 9 |
