Using Speaker Stands

The RSX110, RSX112, and RSX115 feature standard 138" pole mount receptacles, which enable the speaker to be mounted on a standard tripod stand or subwoofer satellite pole. For best results, raise the speakers above the heads of the listening audience.

When mounting a speaker onto any stand, always ensure that the stand is on a flat, level sur- face, with the legs fully extended. Be sure to check that the maximum load weight for the stands is greater than the weight of the RSX loudspeaker. Never use a stand with a maximum load weight lower than the speaker. Do not attempt to mount more than one speaker on a stand at one time. The RSX loudspeakers are heavy. It is recommended that a second person to help place the cabinet on a stand.

When the speaker is placed on a stand, always check the integrity and center of gravity of the system. If the speaker can be tipped easily, or the pole is swaying, it is recommended that you lower the height of the stand. Position the stand and route cables so that the performers and the audience cannot tip over or trip on the system.

Mounted on a tripod stand

Mounted on a subwoofer

 

satellite pole

10

Page 10
Image 10
Samson RSX115, RSX110, RSX215, RSX1185, RSX112 owner manual Using Speaker Stands