Setting up Your LCD Monitor
Connecting Your LCD Monitor
INOUT
English
1 | 2 | 3 |
|
| DVD or VCR |
Figure 3. Cable connections
4 | 5 | 6 | 7 |
Français
1 | Connect the power cord to the DC adapter and connect the adapter jack to the DC12V |
power port on the back of your monitor. | |
2 | Connect the signal cable to the video port on your computer. |
| |
3 | Connect the RCA cable or |
(RCA cable & | |
4 | Connect the audio sources(computer, DVD, VCR or Camcoder) to proper Audio input |
ports(Ain(L), Ain(R) or Ain(stereo)). |
5 | Connect your external audio system to the | |
6 | Connect your headphone to the | |
Connect antenna or CATV cable to “ Antenna” port. | ||
7 | ||
NOTE: US and other NTSC broadcasting regions must use | ||
| ||
| comes with your monitor. | |
| ||
| NTSC coaxial cable | |
| connector |
8 | Turn on both your computer and the monitor. |
9 | If necessary, install the video driver for the monitor. (See “Installing the video driver” |
on page 6) | |
10 | After your monitor has been fully installed successfully, run |
(See page12) |
English 5
Deutsch
Portuguese Italiano Español