![Connecting the Speakers](/images/new-backgrounds/22336/2233611x1.webp)
![Left front speaker](/images/new-backgrounds/22336/2233611xi2.webp)
![Left rear speaker](/images/new-backgrounds/22336/2233611xi3.webp)
![speaker Right front speaker](/images/new-backgrounds/22336/2233611xi4.webp)
GB
•Connect the satellite speakers, center speaker, and subwoofer to the terminals on the rear panel using speaker cords supplied.
•Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and black
Center
speaker Right front speaker
SubwooferRight rear speaker
1
2
3
Press and hold the terminal tab.
Insert the speaker cord.
Release your finger.
Subwoofer
1
2
3
Right rear speaker
Left rear speaker
![Subwoofer](/images/new-backgrounds/22336/2233611xi5.webp)
![1](/images/new-backgrounds/22336/2233611xi6.webp)
![Insert the speaker cord.](/images/new-backgrounds/22336/2233611xi7.webp)
Connecting Video to TV
GB
WOOFER | CENTER | ||
|
|
| IMPEDANCE |
TV
Component | Composite |
Video | Video |
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.
WOOFER | CENTER | ||
|
|
| IMPEDANCE |
Center speaker
Right front speaker | Left front speaker |
• for
S-Video (Better Quality)
If you television is equipped with an
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
• When the Progressive scan mode is selected, the VIDEO and
9 | 10 |