Color Tone
Color Control
-Available in PC/DVI Mode Only
1)PC : Cool / Normal / Warm / Custom
2)DVI : Cool / Normal / Warm
Adjust the individual R, G, B color controls.
-Available in PC Mode Only
1)Red
2)Green
3)Blue
Red
Green
Blue
If you adjust picture using Color Control function, Color Tone will turn to Custom mode.
Image Lock
Auto Adjustment
Size
PIP Picture
Image Lock is used to
-Available in Analog Mode Only
1)Coarse
:Adjust the screen so that all vertical lines (noise) on the screen are removed. Then, use the horizontal position adjustment menu to move the screen to the center, as the screen position may change after the noise has been removed.
2)Fine
:Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).
3)Sharpness
:Adjust the Sharpness.
4)H-Position
:Adjusts the screen location horizontally.
5)
:Adjusts the screen location vertically.
The values of Fine, Coarse, position are adjusted automatically. If you change resolution in the control panel, Auto function will be executed.
- Available in Analog Mode Only
You can switch the Size.
1)Wide
2)4:3
-When the Aspect Ratio is 4:3, PIP is not available.
-When PIP is ON, the SIZE menu is not available.
When the PIP is on, you can adjust the PIP screen setting.
1)Contrast
:Adjusts the Contrast of the PIP window on the screen.
2)Brightness
:Adjusts the Brightness of the PIP window on the screen.
3)Sharpness
:Adjusts the Sharpness of the PIP window on the screen
4)Color
:Adjusts the Color of the PIP window on the screen
5)Tint
:Adds a natural tone to the PIP window.
Coarse
Fine
Sharpness
Contrast
Bightness
Sharpness
Color
Tint
