Samsung 225BW manual Connecting the Monitor, Rgb, Dvi

Connecting the Monitor

1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[ RGB IN ]

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

[ DVI IN ]

2-3.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-sub connection cable.

2-4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter (Option).

3.Turn on your computer and monitor. If your monitor displays an image, installation is completed.