![](/images/new-backgrounds/1127052/127052109x1.webp)
1.Press the D.MENU button to display the DTV menu.
2.Press the or
button to select "Setup", then press the ENTER button.
3.Press the or
button to select "Subtitle ", then press the ENTER button.
4.Select "On" by pressing the or
button. Press the ENTER button.
5.Press the EXIT button to exit.
◈Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under the menu is the basic subtitle and "Hard of hearing" is the subtitle for a
1.Press the D.MENU button to display the DTV menu.
2.Press the or
button to select "Setup", then press the ENTER button.
3.Press the or
button to select "Subtitle Mode", then press the ENTER button.
4.Press the or
button to select "Normal" or "Hard of hearing".
Press the ENTER button. 5. Press the EXIT button to exit.
If the programme you are watching does not support the "Hard of hearing" function, "Normal" automatically activates even though "Hard of hearing" mode is selected.
◈Selecting the Audio Format
You can only hear Dolby Digital sound through the audio receiver connected through an optical cable. You can only hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the internal mute function.
1.Press the D.MENU button to display the DTV menu.
2.Press the or
button to select "Setup", then press the ENTER button.
3.Press the or
button to select "Audio Format", then press the ENTER button.
4.Press the or
button to select "PCM" or "Dolby Digital". Press the ENTER button.
5.Press the EXIT button to exit.
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an optical cable.
◈Selecting the Digital Text (UK only)
If the programme is broadcast with digital text, this feature is enabled.
1.Press the D.MENU button to display the DTV menu.
2.Press the or
button to select "Setup", then press the ENTER button.
3.Press the or
button to select "Digital Text", then press the ENTER button.
4.Press the or
button to select "Disable" or "Enable".
Press the ENTER button.
5.Press the EXIT button to exit.
MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes