15
Getting Started
English

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the POWER
P
button.
✎
Plug & Play is available only when the Source List is set to TV.
✎
Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 14).
1Selecting a language Press the
u
or
d
button, then press the ENTER
E
button. Select
the desired OSD (On Screen Display) language.

P

2Selecting Store Demo
or Home Use
Press the
l
or
r
button, then press the ENTER
E
button.
ySelect the Home Use mode. Store Demo Mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
3Selecting search
options for auto tuning
Press the
u
or
d
button, then press the ENTER
E
button. Select Air, Cable or Auto.
✎
If you selected Cable, you’ll go to the cable system screen. Use the
u
or
d
button
to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTER
E
. Most cable systems use STD. Select the correct cable signal format for
both the Digital and Analog systems.
✎
When done, select Start, and the press ENTER
E
.
4Setting the Clock
Mode
Set the Clock Mode automatically or manually.
yAuto: Allows you to select DST (Daylight Saving Time) mode and time zone.
yManual: Allows you to manually set the current date and time (p.26).
5View the HDTV
Connection Guide
The connection method for the best HD screen quality is displayed.
6Enjoy your TV. Press the ENTER
E
button.
If You Want to Rerun Plug & Play...
MENU
m
→ Setup → Plug & Play → ENTER
E
✎
NOTE
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume in the OSD, press and hold MENU for 5 sec.