Adjusting the LCD Display
Multi Control
Assigns an individual ID to the SET.
•ID Setup
Assigns distinctive IDs to the SET.
•ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.
•MDC Connection
Selects a port to receive the MDC inputs from.
•RS232C MDC : Communicates with the MDC via a RS232C MDC cable.
•RJ45 MDC : Communicates with the MDC via an RJ45 MDC cable.
•Network Setting
•IP Setting : Manual, Auto
•IP Address : Manually enter the IP Address if IP Setting is set to Manual.
•Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
•Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
•
PC / DVI / DisplayPort
•
AV
•
Component
•
HDMI
•
MagicInfo
•
TV
Note
•MagicInfo can only be enabled when a network box(sold separately) is connected.
